_- CHECKUST
Before you operate your new snow
threwer, to ensurethat you receive the
best performance and satisfac_onfrom
this quality product, please reviewthe
followingohecldist:
All assembly instructionshave been
completed.
e" The dischargechute rotatesfreely.
e" No remainingloose parts in carton.
Check the fasteners. Make sure all
fasteners are tight.
v" Check the air pressure of the tires.
Correut air pressure isfrom 14 to 17
PSI. See the side of the _refor maxi-
mum inflation. Do not exceed maxi-
mum inflation.
1t" On e/ectricstart medals, the unit was
shippedwith the starter cordplugged
intothe engine. Before operating, un-
plugthe starter cord from the engine.
While learning howto useyour snow
thrower, pay extra attention to the fol-
lowingimportant items:
v_Engine oil is at proper level Use a
high quality detergent oil classified
"For Service SG, SH, SJ, SL, or
higher".
Make sure gas tank is filled propedy
with clean, fresh, unleaded gasoline
w_ aminimum of 85 octane..
Become familiar with all controls-
their location and function. Operate
controlsbefore startingengine.
F-O410111L 10