![1.Load the Optional Filter Paper:](/images/new-backgrounds/82934/8293455x1.webp)
Hot Drink Center
1.Load the Optional Filter Paper:
a.Be sure the main power switch is in the OFF position.
b.Remove the cup station and grounds bucket.
c.Remove the paper holder cover by turning the fastener a quarter turn to the left.
d.Insert a roll of paper into the paper holder. Route the free end of the paper to the brewer as shown.
e.Replace the cover on the paper holder. Secure it by turning the fastener a quarter turn to the right.
f.Feed paper over swing arm assembly and underneath pinion gear shaft.
TO BREWER
PAPER
HOLDER PAPER
ROLL
COVER
FASTENER
g.Feed paper through the paper guides.
h.Raise the basket housing assembly and feed paper over the lip of the paper mechanism housing.
PAPER | PINION GEAR SHAFT |
GUIDES |
|
BASKET HOUSING
ASSEMBLY
SWING ARM
ASSEMBLY
LIP OF PAPER MECHANISM HOUSING
PAPER MECHANISM HOUSING
NOTE
It may be necessary to reach underneath the brewer between the paper mechanism housing and swing arm assembly to push paper over the lip of the paper mechanism housing.
24 | 6530006 |
| March, 2001 |