Crane Merchandising Systems 6530006 manual Appendix C. Dex/Ucs Interface Operation, Dex+Clr =

Hot Drink Center Set-Up Manual

APPENDIX C. DEX/UCS INTERFACE OPERATION

Connect your portable data collection device (PDCD) to the harness hanging inside the monetary door, and operate it per its instructions.

SELECT DATA TRANSFER METHOD:

6. Press . The display shows: ENTER CODE. You must enter the four-

digit supervisor code within 6 seconds to gain access.

NOTE

A new machine has a factory-set supervisor code of 0000.

When you have entered the right code, you will hear two beeps and see SUPERVISOR in the display.

7. Press	until the display shows DEX+CLR or DEX ONLY.
DEX+CLR =	Data will be cleared after collection is complete.
DEX ONLY =	Data will remain in merchandiser memory after collection is
	complete.

NOTE

A third selection - PRINTER - is available, but selecting it will disable the dex/ucs interface.

8.Press

9.Press

to switch between the two options.

to exit.

This procedure does not need to be repeated unless you desire to change the data transfer option. However, it might be prudent to check the setting prior to down- load to ensure unintentional clearing of data.

DOWNLOAD DATA:

1. Press . The display shows DEX.MODE while data is being trans-

ferred.

6530007	C-1
March, 2001