Hot Drink Center
6.Load Cups:
CAUTION
Use only cups which have been designed for use in a hot bever- age vending machine.
a.Support the cup mechanism in the upright position.
b.Push the latch forward to release the cup mechanism. Continue to sup- port the cup mechanism while you lower it into the loading position.
c.Remove the turret cover.
OBSERVE PROPER HYGIENE - DO NOT TOUCH THE CUPS!
d.Open the bottom of the wrapper on a stack of cups.
e.Insert the wrapped cups into the turret and pull the wrapper out.
DO NOT FILL CUPS ABOVE THE LEVEL MARKED ON THE OUTSIDE OF THE CUP TURRETS OR ABOVE THE “FILL LINE” LABEL INSIDE EACH TUR- RET, OR MOTOR JAMS WILL OCCUR.
USE ONLY THE SAME SIZE AND BRAND OF HOT DRINK CUPS IN EACH TURRET; DO NOT INTERMIX!
f.Replace the turret cover after the turrets have been loaded.
g.Be sure the cup mechanism is locked into the upright position.
TURRET DESIGNATIONS
CUP STACK ROTATION
DOOR
2 | 1B | 1A |
CUP
MECHANISM
VIEW LOOKING DOWN
28 | 6530006 |
| March, 2001 |