Crane Merchandising Systems 6530006 manual Hot Drink Center Set-Up Manual, Fill the Tank

Hot Drink Center Set-Up Manual

4.Fill the Tank:

a.Make sure the main power switch is ON.

b.Turn on the water at its source.

c.	On the maintenance keypad, press		, then press	until the
	display shows TANK.FILL.
d.	Press	. You should hear water running into the tank, and the dis-

play will show FILLING. The water will run until either the tank is full or 12 minutes go by, whichever happens first.

NOTE

The inlet water valve only stays open for 12 minutes at a time. This is a safety feature to prevent water from running into a leaky system and making a mess. It is possible for your tank to take longer than 12 minutes to fill if your location has low water pressure. To be on the safe side, check for leaks if the water runs a long time. If you find none, everything is normal; you just have low water pressure.

e.When you hear the water stop running, repeat steps 3 and 4. Under nor- mal circumstances, nothing will happen. If water starts running and the display shows FILLING again, your pressure is low and it is just taking a long time to fill the tank. Repeat this step if necessary to be sure your water tank is full.

5.Fill the Canisters:

a.Open the lid as shown, and carefully pour the appropriate product into the canister. Repeat for all canisters in the machine.

LID

FILL

CANISTER

6530006	27
March, 2001