![](/images/new-backgrounds/1303781/30378187x1.webp)
¡master section | HPWTM owner’s manual | |||
|
|
|
|
|
alternate outputs features
The HPW has 2 alternate outputs located within the Master module. These outputs are designed to allow the user to select the signal source that is being output. This feature is especailly useful when sending audio for broadcast, recording, an attached room, public spaces or assisted hearing devices. These outputs have full control dynamics, with expan- sion, compression and limiting
81 source | 81 |
M (Mono)
Assigns the mono,
82 |
| |
|
Assigns the
MTX 1 and 2 | 83 |
Assigns the Matrix Mix 1 (or Matrix Mix 2) signal to the alternate output. Pressing both |
|
the MTX1 and MTX 2 assigns a Matrix stereo signal to the alternate output. MTX 1 | 84 |
assigns the signal to the left while MTX2 assigns the signal to the right. If only one MTX | 85 |
signal is assigned, it is in mono. |
82 output mono
This button sets the alternate output for mono operation
When button is in the “OUT” position, the signal is output as stereo.
When button is in the “IN” position, the signal is left and right summed.
83 ambience
This knob is used to add the stereo ambience signal (from the ambience input) to the alternate output. The ambience signal is
See Ambience Input on page 46.
84unity gain
The unity gain is used for applications where the user should not have access to the master level controls,such as a feed for a nursery or narthex. This inset button disables the master level control and sets the gain to unity (same as 0 on master control). A small tool is required to activate the unity gain.
p.44