Crest Audio HPW owner manual 99 PRE, Level, Mute level

master section ¡

98aux send level 5-8

These knobs adjust the amount of signal sent to the corresponding AUX buses. Unity gain occurs at the zero setting, with 6dB additional gain available above that. Note:The Aux Sends default to buses 5-8. To send to auxes 1-4 internal solder blob jumbers are avail- able.

NOTE:Whenchang-			+
ing	the aux	sends,
be	certain	to cut

and solder in correct pairs (aux 1/5, 2/6, 3/7, and 4/8.) For example, if changing to Aux 1, be certain to remove the solder on Aux 5.

99PRE

The default signal source for these AUX SENDS is post-fader. These switches are used for selecting the Pre-fader signals for Auxes 5-8 (or 1-4 if solder blobs have been changed). The normal Pre-fader signal is derived Post-EQ.

When button is in the “OUT” position, aux sends are Post-EQ, Post-fader. When button is in the “IN” position, aux sends are Post-insert, Post-EQ, Pre-fader.

100level

This knob adjust the amount of signal sent from the ambience input to the assigned bus and to the ambient level controls on the alternate outputs. Unity gain occurs at the zero setting, with 10dB additional gain available above that.

98

101mute

This button toggles between the ambience output level (100) and the mute level. The LED illuminates when mute is active. The ambi- ence mute functions through the programmable mute scenes.

When button is in the “OUT” position, the level is controled by the ambience level (100).

When button is in the “IN” position, the level is controlled by the mute level (102).

+

Setting the ambience mute level allows the user to preset two ambi-

ence levels. Use the ambi- ence mute button to select the mute level for spoken word and the main ambi- ence level for music.

99

102

100

102mute level

This knob adjusts the amount of signal sent from the ambience input to the assigned bus when the mute button has been engaged. Unity gain occurs at the zero setting, with 10dB additional gain available above that.

101

p. 47