Crisp Solutions UCommand-525 manual Before using the Learning Function, Operating the UC-525

— Operating the UC-525

Chapter 3

Operating the UC-525

This chapter tells you how to set up the UC-525, automatically con- figure devices, and use advanced features such as macros.

Before using the Learning Function

Before you start configuring your remote controls using the learning function, please note the following:

∙You may map multiple devices to the same device layer. This can be very useful, for example, if you wish to control the TV’s volume using your amplifier without having to change between the two device screens. In this case, you learn the regular TV functions from the TV remote and the volume functions from the amplifier remote. In rare cases this might fail, although no corruption of data or other damage will oc- cur. If this happens, delete the learned code for the device layer and learn only one remote to the device screen.

∙To reconfigure a device layer for a different device, first DELETE all the commands for the device. Refer to the chap- ter ”Using the delete function”.

∙When using the learning function, you must press each but- ton within 120 seconds. Otherwise, the UC-525 will exit learning mode and return to normal operation mode.