Crisp Solutions UCommand-525 manual Frequently Asked Questions, Through volume

— Appendix BC

Appendix C

Frequently Asked Questions

Can I control X10	∙	See Appendix D
devices?
How can I see all	∙ Holding the Power button while in Edit Mode
available icons on		will display all icons.
the UC-525
screen?
Can I configure	∙ Yes, you can map multiple devices to the same
more than one		device layer. This can be very useful; for ex-
device per device		ample, if you wish to control the TV's volume
screen?		using your amplifier, without having to change
		between the two device screens. In this case,
		you learn the regular TV functions from the TV
		remote, but the volume functions from your
		amplifier remote. In some rare cases, if you
		assign too many different remotes to the same
		device layer, this might fail, although no cor-
		ruption of data or other damage will occur.
How can I config-	∙	Refer to ”Can I configure more than one de-
ure “Punch		vice per device screen?” above.
Through” volume
control?
The TRANS But-	∙ It controls the Duplicating Function, which is
ton is not		designed for resellers. This function allows you
described in the		to transfer learned or pre-configured data be-
User's Guide,		tween two UC-525 remote controls via
what is it used		interface cable.
for?
What is that little	∙ It is used for the transfer interface cable. See
round connector		“TRANS Button” above.
on the front for?
Does the UC-525	∙	No
have a built in
timer?

37