Crisp Solutions UCommand-525 manual Pre-configured X10 Codes, Button X10 Function

Appendix D

Pre-configured X10 Codes

The SR-525 comes with pre-defined device codes for X10 compatible infrared transceivers for light and appliance control. Such transceiv- ers are available from different vendors. These IR codes cannot be learned during the normal learning procedure. Follow this procedure to activate X10 codes on the device screen of your choice:

The device button that you configure with the X10 codes will be overwritten and your current configura- tion will be lost.

∙Press the “Learn” button for 3 seconds

∙Unlock learn function by pressing the 4 displayed buttons

∙Hold the device button you want to map the X10 functions to for 5s.

∙Press the 4 displayed buttons

∙Enter learning set code 01 by pressing: ‘0’ – ‘1’

∙The remote beeps and exits into normal mode

This configuration can be deleted and recalled any time, see the chapters for deleting IR codes and recalling original buttons.

Button	X10 Function
Number Buttons 1-9	Channel number 1-9
Power	All lights On
Mute	All lights Off
Volume Up	Channel Bright
Volume Down	Channel Dim
Channel Up	Channel On
Channel Down	Channel Off

39