— Operating the UC-525

The LEARN icon appears under the LEARN button.

First, press the button that you want to become the macro button. You can choose a button from any device screen.

Then record the macro by pressing the desired command buttons. For details, refer to the next section: Macro example

Press the LEARN button to end the macro record- ing for this macro.

If you want to record an- other macro, press a different macro run key and record the macro.

To exit, press the LEARN button.

Time Delays between macro commands

A chain of macro commands is usually played back quite quickly. If necessary, you can set a time delay between each macro command. Time delays are useful if your device needs time between two IR commands. For example, after powering up your TV, it might take a few seconds before it can recognize an Input command. For setting time delays, refer to the next section, “Macro example”.

23

Page 27
Image 27
Crisp Solutions UCommand-525 manual Time Delays between macro commands