©2000 Crown International, Inc.
IQ-USM 810 Service Manual
4-4 Maintenance
130447-1 Rev. A
tal Output 8 Off.
Send: DA DT CT 80 5C 09 01 CS; Set Control Port Digi-
tal Output 9 On.
Send: DA DT CT C0 5C 09 00 CS; Set Control Port Digi-
tal Output 10 Off.
Send: DA DT CT 80 5D 09 01 CS; Set Control Port Digi-
tal Output 11 On.
Send: DA DT CT C0 5D 09 00 CS; Set Control Port Digi-
tal Output 12 Off.
Send: DA DT CT 80 5E 09 01 CS; Set Control Port Digi-
tal Output 13 On
Send: DA DT CT C0 5E 09 00 CS; Set Control Port Digi-
tal Output 14 Off.
Send: DA DT CT 80 5F 09 01 CS; Set Control Port Digi-
tal Output 15 On.
Send: DA DT CT C0 5F 09 00 CS; Set Control Port Digi-
tal Output 16 Off.
Verify the odd control port outputs are on (> 3 volts)
and the even control port outputs are off (<1 volts).
Use the following commands to set the even control
port logical outputs on and the odd outputs off:
Send: DA DT CT 80 58 09 00 CS; Set Control Port Digi-
tal Output 1 Off.
Send: DA DT CT C0 58 09 01 CS; Set Control Port Digi-
tal Output 2 On.
Send: DA DT CT 80 59 09 00 CS; Set Control Port Digi-
tal Output 3 Off.
Send: DA DT CT C0 59 09 01 CS; Set Control Port Digi-
tal Output 4 On.
Send: DA DT CT 80 5A 09 00 CS; Set Control Port Digi-
tal Output 5 Off.
Send: DA DT CT C0 5A 09 01 CS; Set Control Port Digi-
tal Output 6 On.
Send: DA DT CT 80 5B 09 00 CS; Set Control Port Digi-
tal Output 7 Off.
Send: DA DT CT C0 5B 09 01 CS; Set Control Port Digi-
tal Output 8 On.
Send: DA DT CT 80 5C 09 00 CS; Set Control Port Digi-
tal Output 9 Off.
Send: DA DT CT C0 5C 09 01 CS; Set Control Port Digi-
tal Output 10 On.
Send: DA DT CT 80 5D 09 00 CS; Set Control Port Digi-
tal Output 11 Off.
Send: DA DT CT C0 5D 09 01 CS; Set Control Port Digi-
tal Output 12 On.
Send: DA DT CT 80 5E 09 00 CS; Set Control Port Digi-
tal Output 13 Off
Send: DA DT CT C0 5E 09 01 CS; Set Control Port Digi-
tal Output 14 On.
Send: DA DT CT 80 5F 09 00 CS; Set Control Port Digital
Output 15 Off.
Send: DA DT CT C0 5F 09 01 CS; Set Control Port Digi-
tal Output 16 On.
Verify the even control port outputs are on (> 3 volts)
and the odd control port outputs are off (<1 volts).
Use the following commands to set the even control
port logical outputs off:
Send: DA DT CT C0 58 09 00 CS; Set Control Port Digi-
tal Output 2 Off.
Send: DA DT CT C0 59 09 00 CS; Set Control Port Digi-
tal Output 4 Off.
Send: DA DT CT C0 5A 09 00 CS; Set Control Port Digi-
tal Output 6 Off.
Send: DA DT CT C0 5B 09 00 CS; Set Control Port Digi-
tal Output 8 Off.
Send: DA DT CT C0 5C 09 00 CS; Set Control Port Digi-
tal Output 10 Off.
Send: DA DT CT C0 5D 09 00 CS; Set Control Port Digi-
tal Output 12 Off.
Send: DA DT CT C0 5E 09 00 CS; Set Control Port Digi-
tal Output 14 Off.
Send: DA DT CT C0 5F 09 00 CS; Set Control Port Digi-
tal Output 16 Off.
4.6.12 CONTROL PORT ANALOG INPUTS
Spec: Each input measures 0, 5, and 10 VDC within
10%.
Procedure:
Inject 10 VDC into the odd Control Port Analog Inputs.
Inject 5 VDC into the even Control Port Analog Inputs.
Use the following commands to verify the odd analog
inputs are between $FF and $E6:
DA DT CT 81 54 0A CS; Get Control Port Analog Input 9
Return String: DA DT AK CT 81 54 0C IN9 CS
Send: DA DT CT 81 55 0A CS; Get Control Port Analog
Input 11
Return String: DA DT AK CT 81 55 0C IN11 CS
Send: DA DT CT 81 56 0A CS; Get Control Port Analog
Input 13
Return String: DA DT AK CT 81 56 0C IN13 CS
Send: DA DT CT 81 57 0A CS; Get Control Port Analog
Input 15
Return String: DA DT AK CT 81 57 0C IN15 CS
5.13.4. Use the following commands to verify the even
analog inputs are between $98 and $66:
Send: DA DT CT C1 54 0A CS; Get Control Port Analog
Input 10
Return String: DA DT AK CT C1 54 0C IN10 CS