130447-1 Rev. A
1 Introduction
1.1 Introduction
This manual contains complete service information on the Crown® IQ-USM 810 Digital Processor/Digital Mixer. It is designed to be used in conjunction with the Reference Manual; however, some important in- formation is duplicated in this Service Manual in case the Reference Manual is not readily available.
NOTE: THE INFORMATION IN THIS MANUAL IS INTENDED FOR USE BY AN EXPERIENCED TECH- NICIAN ONLY!
1.2 The IQ-USM 810
The Crown IQ-USM 810 is an 8x10 mixer/processor that provides unique dual input processing paths. As an IQ® component, it can be controlled by an IQ Sys- tem®, and with its distributed intelligence™ capability, continue to operate even when an IQ System is not connected. The IQ-USM 810 can also act as a sys- tem interface to other IQ components.
The IQ-USM 810 features high-quality 24-bit A/D and D/A converters along with 240MIPS of full 32-bit float- ing point DSP for optimum dynamic range.
The dual input processing paths include a full comple- ment of signal processing features, including ad- vanced algorithms for gating, auto-leveling, filtering, compression and automixing.
A full 8x8 Matrix Mixer allows any combination of rout- ing and mixing from any input to any output. The Ma- trix Mixer outputs are routed to the two Main Audio
IQ-USM 810 Service Manual
Outputs and eight AUX Audio Outputs. The Main and AUX Audio Output sections further process the sig- nal with individually adjustable signal delay and fil- ters along with an Ambient-Leveler and a high perfor- mance Output Limiter for system protection.
A Multi-Function Control Port implements analog and digital I/O for control and monitor by simple potenti- ometer and switch wall controllers and indicator pan- els.
All of the IQ-USM 810 parameters are backed up via reliable FLASH memory. System configurations may be stored for recall from any of thirty-two system pre- sets from the front panel control or via IQ for Windows software.
1.3 Warranty
Each Reference Manual contains basic policies as related to the customer. In addition, it should be stated that this service documentation is meant to be used only by properly trained personnel. Because most Crown products carry a 3-Year Full Warranty (includ- ing round trip shipping within the United States), all warranty service should be referred to the Crown Fac- tory or Authorized Warranty Service Center. See the applicable Reference Manual for warranty details. To find the location of the nearest Authorized Warranty Service Center or to obtain instructions for receiving Crown Factory Service, please contact the Crown Technical Support Group (within North America), or your Crown/Amcron Importer (outside North America). If you are an Authorized Warranty Service Center and have questions regarding the warranty of a product, please contact the Crown Factory Service Manager or the Crown Technical Support Group.