DSL-500G ADSL Router User’s Guide
| Figure 16. EOA Interface – Modify | |
To Add or Modify AAL5 Parameters define the following: | ||
|
| |
EOA Interface | This is used (by the Router) to identify the EOA interface. | |
If you are adding a new EOA interface, choose the EOA set you want to | ||
| define from the | |
| The IP address assigned to the interface. If the interface will be used as a | |
| simple bridge to your ISP, then you do not need to specify IP information. | |
| If you enable DHCP for this interface, then the Configured IP address will | |
Conf. IP Address: | serve only as a request to the DHCP server. The actual address that is | |
assigned by the ISP may differ if this address is not available. | ||
| ||
| Some ISPs use static IP settings that are manually assigned to each | |
| account. If your service provider instructs you to configure a Static IP | |
| Address, type in the global IP Address for this EOA interface. | |
Net Mask: | If you are assigned a Static IP Address and Net Mask, type in the Net | |
Mask for this EOA interface. | ||
| ||
| When checked, this setting instructs the device to accept IP information | |
Use DHCP: | assigned dynamically by your ISP’s DHCP server. If the interface will be | |
used for bridging with your ISP, leave this checkbox unselected. | ||
| ||
| Select Enable or Disable for DHCP service. | |
Click the Submit button to save the settings in temporary memory. When you are done making changes to the configuration settings, open the Commit & Reboot menu and click the Commit button to save your changes to permanent memory.
28
