D-Link DSL-500G manual Hub or Switch to Router Connection, Power On Router

DSL-500G ADSL Router User’s Guide

Hub or Switch to Router Connection

Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as shown in the diagram below:

If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports (1x, 2x, etc.) with a cross-wired cable or use crossover adapter.

Figure 4. Switch to Router Connection

Power On Router

To power on the device:

1.Insert the AC Power Adapter cord into the power receptacle located on the back of the Router and plug the adapter into a nearby power source.

2.You should see the Power LED indicator light up and remain lit.

4