DSL-564T ADSL Router User’s Guide

Figure 4- 6. Port Forwarding User Rules Management

2.Type a Rule Name in the space provided.

3.Select the port Protocol from the pull-down menu - you may select TCP, UDP or both (TCP/UDP).

4.Configure a range of ports for forwarding. Type the lowest numbered port in the range in the Port Start space. Type the highest numbered port in the Port End space. For a single port, just enter the same number in both spaces.

5.Type a number for the Port Map in the space provided. This is the local port being forwarded to.

6.Click the Apply button to create the new rule. The new rule will appear listed in the table of custom port forwarding rules.

41

Page 53
Image 53
D-Link DSL-564T manual Port Forwarding User Rules Management