DSL-564T ADSL Router User’s Guide

Line Splitter

If you are instructed to use a “line splitter”, you must install the device between the Modem and the phone jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to connect to the wall jack, the Modem and if desired, a telephone or telephone device. The connection ports are typically labeled as follows:

Line - This port connects to the wall jack.

ADSL –This port connects to the Modem.

Phone –This port connects to a telephone or other telephone device.

The diagram below illustrates the proper use of the splitter.

Line Splitter Installation

70

Page 82
Image 82
D-Link DSL-564T manual Line Splitter Installation