D-Link DSL-564T manual Configure Connection 1 for PPPoA, DSL Modulation Settings

DSL-564T ADSL Router User’s Guide

DSL (Modulation) Settings

The DSL Setup menu is used to change the Modulation Type used for the ADSL connection. This setting should only be changed if your service provider has given explicit instructions to change it.

	Do not change the (ADSL) Modulation type used unless you have been instructed to do
	so. If this setting is not configured properly, the Router will not work.
Note

Figure 3-4. DSL Setup menu (change modulation type)

If you are instructed by your ISP to change the Modulation type is used for your service, select the desired modulation type and then click Apply. The modulation types available are T1413, G.DMT, GLITE and MMODE. By default, the Router will automatically detect the modulation used; this setting is listed as MMODE (Multi-mode).

Configure Connection 1 for PPPoA

PPPor Point-to-Point protocol is a standard method of establishing a network connection/session between networked devices. Different forms of PPP include PPPoA and PPPoE (discussed below) involve an authentication process that requires a username and password to gain access to the network. PPPoA (PPP over ATM) as described in RFC 2364, is a method of using PPP on an ATM network. ATM is used for many types of telecommunications services including ADSL.

18