DSL-524T ADSL Router Manual
the window and new settings will appear for the user to configure. The proper selection should be given to you by your ISP.
Dynamic IP Address
Selecting this option in the WAN Settings will change your screen to look like the one seen below. Users choosing this option should have software located on their computer or other networking device to establish a connection between you and your ISP. The Connection Type is chosen by using the pull- down menu. The two choices available to the user here are 1483 Bridged IP LLC and 1483 Bridged IP Vc-Mux,and this correct choice should also be provided to you by your ISP. The Cloned MAC Address field is used to copy the MAC Address of your Ethernet Adapter to the router. Simply enter the MAC Address into the space provided and click the Clone Mac Address button. The Maximum Transmission Unit (MTU) is a link layer restriction on the maximum number of bytes of data in a single transmission. The default size is 1400 bytes per packet. NAT improves network security in effect by hiding the private network behind one global and visible IP address. NAT address mapping can also be used to link two IP domains via a LAN-to-LAN connection. To enable NAT on the Router, use the pull-down menu and select Enabled. The Firewall allows the Router to enforce policies to protect against certain kinds of attacks. To enable the firewall on the Router, use the pull-down menu and select Enabled.
Figure 4- 2. WAN Settings window for Dynamic IP Address
Click Apply to set the Dynamic IP settings for your DSL-524T.
38
