D-Link DSL524T manual About This User’s Guide, Before You Start, Installation Requirements

Models: DSL524T

1 107
Download 107 pages 18.78 Kb
Page 12
Image 12

DSL-524T ADSL Router Manual

About This User’s Guide

This manual provides instructions on how to install the DSL-524T ADSL Router and use it to connect a computer or Ethernet LAN to the Internet.

Before You Start

Please read and make sure you understand all the prerequisites for proper installation of your new Router. Have all the necessary information and equipment on hand before beginning the installation.

Installation Overview

The procedure to install the Router can be described in general terms in the following steps:

1.Gather information and equipment needed to install the device. Before you begin the actual installation make sure you have all the necessary information and equipment.

2.Install the hardware, that is, connect the cables (Ethernet and telephone) to the device and connect the power adapter.

3.Check the IP settings on your computer and change them if necessary so the computer can access the web-based software built into the Router.

4.Use the web-based management software to configure the device to suit the requirements of your ADSL account.

Installation Requirements

Information you will need from your ADSL service provider:

 

This is the Username that is used to log on

Record your info

Username

to your ADSL service provider’s network. It is

here.

 

commonly in the form user@isp.com.

 

 

This is the Password that is used, in

 

Password

conjunction with the Username above, to log

 

 

on to your ADSL service provider’s network.

 

Connection

This is the method that your ADSL service

 

provider uses to send and receive data

 

Protocol

 

between the Internet and your computer.

 

 

 

 

This is the Virtual Path Identifier (VPI). It is

 

 

used in conjunction with the Virtual Channel

 

VPI

Identifier (VCI) below, to identify the data

 

 

path between your ADSL service provider’s

 

 

network and your computer.

 

 

This is the Virtual Channel Identifier (VCI). It

 

 

is used in conjunction with the VPI above to

 

VCI

identify the data path between your ADSL

 

 

service provider’s network and your

 

 

computer.

 

12

Page 12
Image 12
D-Link DSL524T manual About This User’s Guide, Before You Start, Installation Requirements