INTRODUCTION
21
2
Standard Application Program
A Standard Application Program is factory-loaded onto Matrix 400™. This program controls
code reading, data formatting, serial port and Ethernet interfacing, and many other operating
and control parameters. It is completely user configurable from a Laptop or PC using the
dedicated configuration software program VisiSet™, provided on CD-ROM with the reader.
There are different programmable operating modes to suit various code reading system
requirements.
Quick, automatic focus, positioning, calibration and code setting of the imager can be
accomplished using the X-PRESS™ button and LEDs on top of the reader without the
necessity of a PC.
The previous functions can also be performed through VisiSet™ through the Setup Wizard.
This tool includes visual feedback from the reader.
VisiSet™ provides a Calibration Tool to verify the exact positioning of the reader and to
maximize its reading performance.
Statistics on the reading performance can also be visualized through a dedicated window in
VisiSet™.
Symbol Verification can be performed through VisiSet™ when the reader has been installed
and setup as a Verifier station. For details see the Matrix Code Quality Verifier Solution
manual.
Programmability
If your requirements are not met by the Standard Application Program, Custom Application
Programs can be requested at your local Datalogic distributor.
Some of the main features of this reader are given below:
Excellent Performance
1.3 MPixels (SXGA) & 2.0 MPixels (UXGA) models
Adjustable focus through C-Mount lenses
Powerful Internal Lighting Systems
Outstanding decoding capability on 1D, 2D, Stacked, Postal symbologies
Excellent performance on DPM applications
Omni-directional reading
Frame Rate up to 27 frames/sec for SXGA models and 15 frame/sec for UXGA models
Region Of Interest Windowing for higher frame rate
Up to 100 readable codes in a single frame