Datalogic Scanning 90ACC1780 manual Sending Configuration Strings from Host, Setup Procedures

4 GRYPHON™

4.1.4Sending Configuration Strings from Host

An alternative configuration method is provided in Appendix A using the RS232 interface. This method is particularly useful when many devices need to be configured with the same settings. Batch files containing the desired parameter settings can be prepared to configure devices quickly and easily.

4.2SETUP PROCEDURES

For GRYPHON™ D-Series readers, follow the setup procedures in pars. 4.3 and 4.6.

For GRYPHON™ M-Series readers, the setup procedures depend on two basic applications, Stand Alone or STAR-System™.

Stand Alone applications allow communication with the Host by either the OM-GRYPHON™ cradle (par.4.4), or by the STAR-Modem™ radio modem (par. 4.4.2).

STAR-System™ applications allow communication with the Host through an RS485 network by the STARGATE™ RF base station or by the STAR-Modem™ radio modem (par. 4.5).

Proceed as shown in the following diagram:

Begin Setup by choosing the setup procedure for your GRYPHON™ reader as indicated below.

GRYPHON™ D

Par. 4.3

Par. 4.6

Stand Alone Applications

GRYPHON™ M/OM-GRYPHON™

Par. 4.4

Par. 4.6

Optional Par. 4.4.1

multiple guns per OM-GRYPHON™

GRYPHON™ M/STAR-Modem™

in Stand Alone Mode

Par. 4.4.2

STAR-System™ Applications

GRYPHON™ M/STAR-System™

Par. 4.5

•STARGATE™

•STAR-Modem™ in STAR-System™ Mode

End of Setup

Your reader is now ready to read barcodes using the default settings.

12