Datalogic Scanning 90ACC1780 manual k i&k, Read + i78k + 40 + FF I78k

Enter configuration Exit and Save Configuration

ik

ik

DATA FORMAT

i k

i k

CUSTOM CODE IDENTIFIER

define custom code identifier(s)

☞i&)k i&)k

i&)k

Read the above code.

(Code Identifiers default to Datalogic standard, see table on previous page).

Select the code type from the code table in Appendix B for the identifier you want to change.

You can define 1 or 2 identifier characters for each code type. If only 1 identifier character is required, the second character must be selected as FF (disabled). Read the hexadecimal value corresponding to the character(s) you want to define as identifiers for the code selected in step : valid characters are in the range 00-FD.

Example: To define Code 39 Code Identifier = @

	define custom code identifier(s)	Code 39
Read	i&'k	+ i78k + 40 + FF
	i&'k	i78k

49