DATA FORMAT
•AIM standard identifiers are not defined for all codes: the X identifier is assigned to the code for which the standard is not defined. The y value depends on the selected options (check digit tested or not, check digit tx or not, etc.).
•When customizing the Datalogic Standard code identifiers, 1 or 2 identifier characters can be defined for each code type. If only 1 identifier character is required, the second character must be selected as FF (disabled).
•The code identifier can be singly disabled for any code by simply selecting FF as the first identifier character.
•Write in the Custom character identifiers in the table above for your records.
47
