CONFIGURATION

4

 

4.4.1Using Multiple M-Series Readers With Same Cradle

If you want to use several M-Series readers with the same OM-GRYPHON™ cradle, you must first Bind the cradle with one of the readers (see previously described configuration procedure).

Successive readers can be associated with the same cradle by following the configuration procedure substituting the Bind command with Join (step 5).

5.Join

i 3//k

i 3//k

i 3//k

The green LED on the GRYPHON™ M will blink: the reader is ready to be positioned onto the cradle. Complete step 6.

END of procedure.

If the cradle is not Bound to a reader, its address assumes a random value which can cause conflicts and malfunctions to other cradles within its range.

CAUTION

YOUR READER IS NOW READY TO READ BARCODES.

To change the defaults see par. 4.7.

15

Page 25
Image 25
Datalogic Scanning 90ACC1780 manual Using Multiple M-Series Readers With Same Cradle, Join 3//k