Getting Started

2.0Before Using This Printer

Unpacking the Printer

The printer was carefully packaged to avoid any damage during transit. Before opening, closely inspect the box for damages. In the event of shipping damage, contact the carrier immediately regarding it’s nature and extent.

In order to operate the printer you will need to remove the packaging materials that are placed inside the printer for shipment. Complete the following steps before connecting power. It may be helpful to refer to Figure 2-2 when removing the packing material.

nRemove the printer from the box.

oRemove the printer from the plastic bag.

pRemove the tape that extends over the printhead assembly.

qRemove the piece of foam between the printhead and platen.

rRemove the tape that covers the J-Hook on the Ribbon Take-Up Hub.

;Note: Save all packaging materials in the event that shipping the printer is ever required.

PE Series Operator’s Manual

5

Page 15
Image 15
Datamax PE manual Getting Started, Before Using This Printer