Test Mode

Pqfsbujpo

(CONT.)

*Disable Enable

Cutter Enable *Disable

Ribbon Saver Enable *Disable

Conversion

*Decimal Metric

Dpnnvojdbujpot

Comm Setup PORTA 9600 8 N 1 BOTH

*Standard Codes Alternate Codes

Causes the printer to send debug characters back to the host. See Appendix E for listings.

Controls an external cutter mechanism.

Enables an external cutter.

Cutter not being used.

Controls the optional Ribbon Saver feature. Enables the option.

Option is not installed or disabled.

Sets standard or metric measurement, automatically updating all operations with the new selection. Measurements in inches

Measurements in millimeters

Allows the user to select communication values for each port.

Selects the port and sets parameters.

Selects serial Port A, B or Parallel communication. Selectable serial baud rates: 300, 600, 1200, 2400, 4800, 9600, 19200.

Sets word length: 7 or 8 bits.

Sets parity bit: E = even, O = odd, N = none.

Sets stop bit length: 1 or 2 bits.

Selects handshaking method: XON/XOFF, CTS/DTR or BOTH.

Sets the DPL control code values.

01 Hex = SOH command, 02 Hex = STX command 5E Hex = SOH command, 7E Hex = STX command