Datamax PE manual Ribbon Removal, Removal of a Partially Used Roll of Ribbon

3.4Ribbon Removal

Removal of a Partially Used Roll of Ribbon

Complete the following steps to remove and save a ribbon:

nCut the ribbon at the point shown in Figure 3-8.

oTurn the Ribbon Take-up Hub until the end of the ribbon has cleared the printhead area.

pGrasp the roll of used ribbon and slide the used ribbon straight off the Ribbon Take-up Hub. Discard the used ribbon.

qGrasp the roll of unused ribbon, pull and slide the unused ribbon from the Ribbon Supply Hub, storing it for future use.

Figure 3-8 Ribbon Cutting Point

PE Series Operator’s Manual 15