BQQMJDBUPS!CVTZ
DPWFS!PQFO!GBVM U
IFBE!VQ!GBVMU
System is waiting for control of the Print Cycle from the applicator.
Printer applicator enable control may be incorrectly configured. Verify setup; see Section 4, Advanced Setup/PE Options/PE Apply HW.
Possible defective applicator output control.
Possible defective printer applicator port.
The cover interlock switch is open.
Verify that the cover has been closed completely.
Interlock switch may be defective or out of adjustment; call for service.
The printhead interlock switch is open.
Verify that the printhead
Interlock switch may be defective or out of adjustment; call for service.
PE Series Operator’s Manual | 57 |
