Welcome to CarChip
2.Click on the Draw Speed Bands check box to toggle the function on and off. A check indicates that the Draw Speed Bands function has been enabled.
3.Click OK to save the new plot setup. Click Cancel to exit the dialog box and retain the previous plot setup. Click Apply to make the change without exiting the dialog box.
See Also:
Speed Band
Draw Braking Events
The Draw Braking Events check box in the Setup / Plots dialog box displays any hard and extreme braking events in the Trip Log Plot view when selected. The thresholds for hard and extreme braking are set in the Set Braking Thresholds dialog box.
If the Draw Braking Events box is selected from the Setup / Plots dialog box, the braking events are represented by red vertical lines. A hard braking event is a dotted red vertical line. An extreme braking event is a solid red vertical line.
To display acceleration events in the plots:
1.Select Plots from the Setup menu. The Setup / Plots dialog box displays.
2.Click the Draw Braking Events check box to toggle the function on and off. A check indicates that the Draw Braking Events function has been enabled.
3.Click OK to save the new plot setup. Click Cancel to exit the dialog box and retain the previous plot setup. Click Apply to make the change without exiting the dialog box.
Draw Acceleration Events
The Draw Acceleration Events check box in the Setup / Plots dialog box displays any hard and extreme acceleration events in the Trip Log Plot view when selected. The thresholds for hard and extreme accelerations are set in the Set Acceleration Thresholds dialog box.
If the Draw Acceleration Events box is selected from the Setup / Plots dialog box, the acceleration events are represented by blue vertical lines. A hard acceleration event is a dotted blue vertical line. An extreme acceleration event is a solid blue vertical line.
To display acceleration events in the plots:
1.Select Plots from the Setup menu. The Setup / Plots dialog box displays.
27
