70 Adding Parts
www.dell.com | support.dell.com
6If necessary, remove a memory module:
aPress out the securing clip at each end of the memory module
connector.
bGrasp the module and pull up.
If the module is difficult to remove, gently ease the module back
and forth to remove it from the connector.
7To insert a module, press out the securing clip at each end of the
memory module connector.
8Align the notches on the bottom of the module with the crossbars in
the connector.
NOTICE: To avoid breaking the memory module, do not press near the middle
of the module.
securing clips (2)
notches (2)
step7
memory module
cutouts (2)
connector
step8
step9
memory module connectors