w w w . d e l l . c o m s u p p o r t . d e l l . c o m
To remove the computer stand:
1Turn the computer over so that the stand is at the top.
2Loosen the thumbscrew and lift the stand away.
3Place the computer in a horizontal position.
See the documentation that came with the printer for any recommended preparation procedures, such as:
•Removing the packaging
•Installing the toner or ink cartridge
•Loading paper
Then follow the instructions that came with the printer to connect it to the computer. If no information is provided, see the following sections.
Parallel Printer
1Turn off the computer (see page 22).
NOTICE: Use only a standard IEEE parallel cable measuring 3 m (10 ft) or less to connect the printer to the computer. Use of a nonstandard cable may prevent the printer from working.
18
