w w w . d e l l . c o m s u p p o r t . d e l l . c o m
3Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
4Close the computer cover (see page 72).
5Attach the computer stand (optional) (see page 16).
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
6Connect your computer and devices to electrical outlets, and turn them on.
7
8Click the General tab.
9To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
1Ensure that all cables are connected, and fold cables out of the way. Make sure cables are not routed over the drive
2Ensure that no tools or extra parts are left inside the computer.
3Pivot the cover down and ensure that the release buttons click into place.
4Attach the computer stand (optional) (see page 16).
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
5Connect your computer and devices to electrical outlets, and turn them on.
72
