Removing the Mini-Card | 51
19 Removing the Mini-Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
If you ordered a wireless Mini-Card with your computer, the card is already installed.
Prerequisites
1Remove the base cover. See "Removing the Base Cover" on page 27.
2Remove the battery. See "Removing the Battery" on page 17.
3Remove the keyboard. See "Removing the Keyboard" on page 21.
4Remove the palm rest. See "Removing the Palm Rest" on page 45.
Procedure
1Disconnect the antenna cables from the connectors on the Mini-Card.
2Remove the screw that secures the Mini-Card to the connector on
the system board.
1screw 2 Mini-Card
3 antenna cables (2)
3
1
2
book.book Page 51 Wednesday, April 11, 2012 4:13 PM