Replacing the Display Assembly | 75
30 Replacing the Display Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1Place the display assembly in position and replace the screws that secure the
display assembly to the computer base.
2Connect the antenna cables to the connectors on the Mini-Card.
3Close the display and turn the computer over.
4Replace the screws that secure the display assembly to the computer base.
Postrequisites
5Replace the palm rest. See "Replacing the Palm Rest" on page 49.
6Replace the keyboard. See "Replacing the Keyboard" on page 25.
7Replace the base cover. See "Replacing the Base Cover" on page 29.
8Replace the battery. See "Replacing the Battery" on page 19.
9Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 75 Wednesday, April 11, 2012 4:13 PM