38 Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1Connect the camera cable to the connector on the camera module and secure it with the tape.
2Use the alignment posts on the display cover to place the camera module in position and adhere the camera module to the display cover.
Postrequisites
1Replace the display panel. See "Replacing the Display Panel" on page 83
1Replace the display bezel. See "Replacing the Display Bezel" on page 79.
2Replace the display assembly. See "Replacing the Display Assembly" on page 75.
3Replace the battery. See "Replacing the Battery" on page 19.
4Replace the palm rest. See "Replacing the Palm Rest" on page 49.
5Replace the keyboard. See "Replacing the Keyboard" on page 25.
6Replace the base cover. See "Replacing the Base Cover" on page 29.
7Replace the battery. See "Replacing the Battery" on page 19.
8Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Camera Module | 93 |
