Microprocessor Thermal Cooling Assembly: Dell Latitude C610/C510 Service Manual
Back to Contents Page
Microprocessor Thermal Cooling Assembly
Dell™ Latitude™ C610/C510 Service Manual
Removing the Microprocessor Thermal Cooling Assembly
Replacing the Microprocessor Thermal Cooling Assembly
Removing the Microprocessor Thermal Cooling Assembly
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.
1.Remove the hard drive.
2.Remove the keyboard.
3.Loosen the four captive screws that secure the microprocessor thermal cooling assembly to the system board.
1 
microprocessor thermal cooling assembly 
2 
captive screws (4)
