Dell C610, C510 manual M2 x 3-mm screw

Hybrid Cooling Fan: Dell Latitude C610/C510 Service Manual

1	system-board interface connector	5	M2 x 3-mm screw (1)
2	fan power cable	6	M2.5 x 5-mm screws (2)
3	spring fingers	7	hybrid cooling fan
4	keyboard screw hole

7. Disconnect the fan power cable from the system-board interface connector and remove the hybrid cooling fan.

NOTE: The fan power cable is long, and can be pulled out from under the EMI shield to provide access to the connector.

NOTICE: Do not block the keyboard screw hole when reinstalling the fan. Route the fan power cable under the spring fingers and behind the keyboard screw hole to prevent damage to the fan power cable.

Back to Contents Page

file:///C/Work%20Area%20-%20A/E%20DOC%20Posting/latc610/service%20manual/fan.htm[2/1/2013 11:00:49 AM]