Dell X8300-6059, D03M001 service manual Removing the Graphics Card Bracket

5

Graphics Card Bracket

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.) removed.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.

NOTE: The graphic card bracket is present in your computer only if you ordered a double-width graphics card at the time of purchase.

Removing the Graphics Card Bracket

1Follow the instructions in "Before You Begin" on page 13.

2Remove the computer cover (see "Removing the Computer Cover" on page 17).

3Remove the two screws that secure the graphics card bracket to the chassis.

4Lift the graphics card bracket off the chassis.

5Set the graphics card bracket aside in a secure location.

Graphics Card Bracket

31