Drives 49
2
Check the documentation that shipped with the hard drive to verify that it
is configured for your computer.
3
Slide the secondary hard drive into the hard drive cage.
4
Align the screw holes on the secondary hard drive with the screw holes on
the hard drive cage.
5
Replace the four screws that secure the secondary hard drive to the hard
drive cage.
Replacing the Hard Drive Cage
1
Follow the instructions in "Before You Begin" on page 13.
2
Align the screw holes on the hard drive cage with the screw holes on the
chassis.
3
Replace the three screws that secure the hard drive cage to the chassis.
4
If applicable, connect the power and data cables to the secondary hard
drive (see "System Board Components" on page10).
Replacing the Primary Hard Drive
1
Follow the instructions in "Before You Begin" on page 13.
2
Check the documentation that shipped with the drive to verify that it is
configured for your computer.
3
Slide the primary hard drive into the hard drive cage.
4
Align the screw holes on the primary hard drive with the screw holes on the
chassis.
5
Replace the four screws that secure the primary hard drive to the chassis.
6
Connect the power and data cables to the primary hard drive (see "System
Board Components" on page10).
7
Replace the computer cover (see "Replacing the Computer Cover" on
page 18).
8
Connect your computer and devices to electrical outlets, and then turn
them on.
9
See the documentation that shipped with the hard drive for instructions
on installing any software required for drive operation.
book.book Page 49 Wednesday, April 25, 2012 12:34 PM