Wireless Mini-Card 35
1
Follow the instructions in "Before You Begin" on page 13.
2
Align the notch on the Mini-Card with the tab in the system-board
connector.
3
Insert the Mini-Card at a 45-degree angle into the system-board
connector.
4
Press the other end of the Mini-Card down until it clicks into place. If you
do not hear the click, remove the Mini-Card and reinstall it.
5
Connect the appropriate antenna cables to the WLAN card you are
installing. The WLAN card has two triangles marked on the label (black
and white):
• Connect the black cable to the connector marked with a black
triangle.
• Connect the white cable to the connector marked with a white
triangle.
6
Replace the computer cover (see "Replacing the Computer Cover" on
page 18).
7
Reconnect the computer and devices to electrical outlets, and then turn
them on.
book.book Page 35 Wednesday, April 25, 2012 12:34 PM