2Remove the computer cover (see "Removing the Computer Cover" on page 17).

3Disconnect the antenna cable(s) from the Mini-Card.

1

2

3

1

antenna cables (2)

2

Mini-Card

3

clips (2)

 

 

4Release the Mini-Card by pressing the clips on either side of the card.

5Lift the Mini-Card away from the system-board connector.

CAUTION: When the Mini-Card is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge" in the safety instructions that shipped with your computer).

Replacing the Mini-Card

CAUTION: The connectors are keyed to ensure correct insertion. Use of excessive force may damage the connectors.

CAUTION: To avoid damage to the Mini-Card, ensure that there are no cables or antenna cables under the Mini-Card.

34

Wireless Mini-Card

Page 34
Image 34
Dell X8300-6059, D03M001 service manual Replacing the Mini-Card