Dell E6400 XFR service manual Doors, Replacing the Handle, Removing Media Bay Door

Dell™ Latitude™ E6400 XFR Service Manual

5.Remove the carry handle from the sockets and slide out of the notebook.

36.2 Replacing the Handle

1.Insert the carry handle pinion into the sockets on the base of the notebook.

1

2

1 Handle pinion 2 Tab socket

NOTICE: Image above has palm rest removed to show tab socket close-up. During installation, verify handle pinions are inserted into the tab sockets properly during reassembly.

2.Replace the four M2.5 x 8-mm bottom retaining screws.

3.Replace the six M2.5 x 8-mm palm rest retaining screws.

4.Follow the procedures in After Working on Your Computer.

37 Doors

37.1 Removing Media Bay Door

PartsLocation

1

2	M3 x 3 mm screws (3)
1 Media bay door 2

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

1.Follow the procedures in Before Working on Your Computer.

Page 64