Back to Contents Page

Display

Dell™ Latitude™ E6500 Service Manual

Removing the Display Assembly

Display Inverter

Replacing the Display Assembly

Removing the Camera and Microphone Assembly

Removing the Display Bezel

Replacing the Camera and Microphone Assembly

Replacing the Display Bezel

Removing the Latch Hook Assembly

Removing the Display Panel

Replacing the Latch Hook Assembly

Replacing the Display Panel

Removing the Display Cover

Removing the Display Panel Brackets

Replacing the Display Cover

Replacing the Display Panel Brackets

 

NOTE: Some graphics may vary slightly, depending on whether you ordered a cold-cathode fluorescent lamp (CCFL) display or an LED display.

Removing the Display Assembly

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.

1.Follow the instructions in Before Working on Your Computer.

2.Close the display and turn the computer over.

3.Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).

4.Remove the hinge covers (see Removing the Hinge Covers).

5.Disconnect the display cable, the WPAN cable, and the modem cable.

CAUTION: After unrouting the cables, place all cables to the rear and away from the computer.

6. Unroute the display cable and the wireless cables (WLAN, WWAN, and WPAN).

1

display cable

2

WPAN cable

 

 

 

 

3

WLAN cable

4

WWAN cable

 

 

 

 

7. Remove the M2.5 x 5-mm screws from each hinge.

1 M2.5 x 5-mm screws (2)

Page 19
Image 19
Dell E6500 manual Removing the Display Assembly