Dell E6500 manual Removing the Keyboard, Replacing the Keyboard

Back to Contents Page

Keyboard

Dell™ Latitude™ E6500 Service Manual

Removing the Keyboard

Replacing the Keyboard

Removing the Keyboard

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.

1.Follow the procedures in Before Working on Your Computer.

2.Remove the hinge covers (see Removing the Hinge Covers).

3.Remove the LED cover (see Removing the LED Cover).

4.Remove the two M2 x 3-mm screws along the top of the keyboard.

CAUTION: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the keyboard.

5. Using the pull tab, gently lift the top of the keyboard only, then lift out at an angle to remove the keyboard from its connector.

1 keyboard 2 M2 x 3-mm screws (2)

3 blue pull tab

Replacing the Keyboard

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.

CAUTION: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the keyboard.

1.Holding the top of the keyboard slightly above the computer, slide the bottom of the keyboard in at an angle, and fit the tabs and keyboard connector along the bottom of the keyboard beneath the front-inside edge of the palm rest.

NOTE: Pressing down on the ALT keys helps to seat the keyboard properly.

2.Press each side to snap the keyboard into place.

3.Replace the two M2 x 3-mm screws at the top of the keyboard.