Dell PP22L manual Replacing the Dimm B Memory Module, 167

3Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

4Remove the module from the connector.

1 2

1 securing clips (2) 2 memory module

Replacing the DIMM B Memory Module

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

1Align the notch in the module edge connector with the tab in the connector slot.

2Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it.

NOTE: If the memory module is not installed properly, the computer may not boot. No error message indicates this failure.

Adding and Replacing Parts

167