Dell PP22L manual Touch Pad, Cleaning a Non-Optical Mouse, Cleaning an Optical Mouse, 207

Touch Pad

1Shut down and turn off your computer (see "Turning Off Your Computer" on page 154).

2Disconnect any attached devices from the computer and from their electrical outlets.

3Remove any installed batteries (see "Battery Performance" on page 53).

4Moisten a soft, lint-free cloth with water, and wipe it gently across the surface of the touch pad. Do not allow water from the cloth to seep between the touch pad and the surrounding palm rest.

Mouse

NOTICE: Disconnect the mouse from the computer before cleaning the mouse

If your screen cursor skips or moves abnormally, clean the mouse.

Cleaning a Non-Optical Mouse

1Clean the outside casing of the mouse with a cloth moistened with a mild cleaning solution.

2Turn the retainer ring on the underside of your mouse counterclockwise, and then remove the ball.

3Wipe the ball with a clean, lint-free cloth.

4Blow carefully into the ball cage or use a can of compressed air to dislodge dust and lint.

5If the rollers inside the ball cage are dirty, clean the rollers with a cotton swab moistened lightly with isopropyl alcohol.

6Recenter the rollers in their channels if they are misaligned. Ensure that fluff from the swab is not left on the rollers.

7Replace the ball and retainer ring, and turn the retainer ring clockwise until it clicks into place.

Cleaning an Optical Mouse

Clean the outside casing of the mouse with a cloth moistened with a mild cleaning solution.

Appendix

207