Dell PP22L Viewing the System Setup Screen, Commonly Used Options, Changing the Boot Sequence

Viewing the System Setup Screen

1Turn on (or restart) your computer.

2When the DELL logo appears, press <F2> immediately.

If you wait too long and the Microsoft Windows logo appears, continue to wait until you see the Windows desktop, then shut down your computer and try again.

System Setup Screen

NOTE: For information about a specific item on a system setup screen, highlight the item and see the Help area on the screen.

On each screen, the system setup options are listed at the left. To the right of each option is the setting or value for that option. You can change settings that appear as white type on the screen. Options or values that you cannot change (because they are determined by the computer) appear less bright.

The upper-right corner of the screen displays help information for the currently highlighted option; the lower-right corner displays information about the computer. System setup key functions are listed across the bottom of the screen.

Commonly Used Options

Certain options require that you reboot the computer for new settings to take effect.

Changing the Boot Sequence

The boot sequence, or boot order, tells the computer where to look to find the software needed to start the operating system. You can control the boot sequence and enable/disable devices using the Boot Order page of the system setup program.

NOTE: To change the boot sequence on a one-time-only basis, see "Performing a One-Time Boot" on page 205.

The Boot Order page displays a general list of the bootable devices that may be installed in your computer, including but not limited to the following:

•Diskette Drive

•Internal HDD

204

Appendix