Adding and Replacing Parts 163
NOTICE: To help prevent damage to the computer, perform the following steps
before you begin working inside the computer.
1
Ensure that the work surface is flat and clean to prevent the computer
cover from being scratched.
2
Turn off your computer (see "Turning Off Your Computer" on page 161).
NOTICE: To disconnect a network cable, first unplug the cable from your computer,
and then unplug it from the network connector.
3
Disconnect any telephone or network cables from the computer.
4
Disconnect your computer and all attached devices from their electrical
outlets.
NOTICE: To help prevent damage to the system board, remove the battery from the
battery bay before you service the computer.
NOTE: To avoid damage to the computer, use only the battery designed for this
particular Dell computer. Do not use batteries designed for other Dell computers.
5
Turn the computer over.
6
Slide and click the battery release latches.
7
Slide the battery out of the battery bay.
1 battery 2 battery release latches (2)
2
1