Dell PP22L owner manual Setting Display Resolution and Refresh Rate

To disable dual independent display mode:

1Click the Settings tab in the Display Properties window.

2Click the monitor 2 icon, uncheck the Extend my Windows desktop onto this monitor option, and then click Apply.

If necessary, press <Fn><F8> to bring the screen image back to the computer display.

Windows Vista

1Click the Windows Vista Start button , and click Control Panel.

2Under Appearance and Personalization, click Adjust screen resolution.

3In the Display Settings window, click the monitor 2 icon, click the Extend the desktop onto this monitor check box, and then click Apply.

4Click OK to close the Display Settings window.

To disable extended desktop mode:

1In the Display Settings window, click the Settings tab.

2Click the monitor 2 icon, uncheck the Extend the desktop onto this monitor option, and then click Apply.

Setting Display Resolution and Refresh Rate

NOTE: If you change the display resolution from the current settings, the image may appear blurry or text may be hard to read if you change the resolution to one not supported by your computer and display. Before you change any of the display settings, make a note of the current settings so you can change back to the previous settings if needed.

You can enhance the legibility of text and change the appearance of images on the screen by adjusting display resolution. As you increase resolution, items appear smaller on the screen. In contrast, lower resolution causes text and images to appear larger and can benefit people with vision impairments. To display a program at a specific resolution, both the video card and the display must support the program, and the necessary video drivers must be installed.

NOTE: Use only the Dell-installed video drivers, which are designed to offer the best performance with your Dell-installed operating system.

50

Using the Display